Okuma Cavalla 5N-II Second Hand
Available on finance, find out more
For total purchases of £320 or over your minimum payments will be: £15 per month for a 24 month period.
£200.00
Stock:
About the product
- Two Speed jigging reel
- Right hand wind
- Lever drag
- 6061-T6 Rigid Aluminium Frame & Side Plates
- Carbonite Drag Washers with Cal’s Drag Grease
- Max drag (Hi speed 7kg – Lo speed 11kg)
- Cold-Forged Type-II Anodized Machined Aluminium Spool
- 4 HPB Corrosion-Resistant Ball Bearings
- On/Off Bait Clicker
- CRC: Corrosion Resistant Coating Process
- 17-4 Grade Stainless Steel Main and Pinion Gears
- Silent Anti-Reverse System for Smooth Cranking
- Additional Stabilization Plate for Anti-Reverse
- Retrieve – Hi 6.4:1 – Lo 3.8:1
- Recovery – Hi 107cm – Lo 63cm
- Capacity 0.32/420, 0.37/300, 0.42/250
- Weight 460gm
Okuma Cavalla 5N-II Second Hand
This item is second hand.
The overall condition is near mint with no real signs of use. Expect micro marks but i don’t think this reel has seen the sea.
Is spooled up with heavyish spider wire in blue camo which looks unused and is supplied with its box and spares.
The Okuma Cavalla 5N II is a conventional Jigging Lever Drag Right hand wind reel
Okuma Cavalla 5N II is a super strong reel ideal for a wide range of techniques and whilst it is superb for working jigs it can also be used for casting, trolling or light bottom fishing.
It is built tough with a frame machined from a block of high quality 6061-T6 aluminium. Internally fitted out with stainless steel, main and pinion gears. Supplied with Cold forged type 2 machined aluminium spool. A reliable and proven carbonite lever drag system and four CRC Corrosion Resistant Coated bearings ensuring smooth cranking performance.
The Okuma Cavalla 5N II has a two speed system, Hi 6.4:1 and Lo 3.8:1, and you can quickly change gear using the switch on the handle boss.
The solid handle has a long reach for extra winding power and the rubber T knob is textured to give a good grip.
About the product
- Two Speed jigging reel
- Right hand wind
- Lever drag
- 6061-T6 Rigid Aluminium Frame & Side Plates
- Carbonite Drag Washers with Cal’s Drag Grease
- Max drag (Hi speed 7kg – Lo speed 11kg)
- Cold-Forged Type-II Anodized Machined Aluminium Spool
- 4 HPB Corrosion-Resistant Ball Bearings
- On/Off Bait Clicker
- CRC: Corrosion Resistant Coating Process
- 17-4 Grade Stainless Steel Main and Pinion Gears
- Silent Anti-Reverse System for Smooth Cranking
- Additional Stabilization Plate for Anti-Reverse
- Retrieve – Hi 6.4:1 – Lo 3.8:1
- Recovery – Hi 107cm – Lo 63cm
- Capacity 0.32/420, 0.37/300, 0.42/250
- Weight 460gm
You must be logged in to post a review.
Reviews
There are no reviews yet.